Toyotomi RUBI Series User Manual page 71

PORTABLE AIR CONDITIONER
Clean and Maintenance
NOTICE
dust in the operation environment, you can increase clean frequency.
Clean heat discharge pipe
Remove the heat discharge pipe from air conditioner, clean and dry it , and then
reinstall it. (For the method of installation and removal , please refer to the
instruction for "Installation and disassembly of heat discharge pipe").
Checking before use-season
1. Check whether air inlets and air outlets are blocked.
2. Check whether plug and socket are in good condition.
4. Check whether batteries are installed in remote controller.
5. Check whether joint, window bracket and heat discharge pipe are installed tightly.
6. Check whether heat discharge pipe is damaged.
Checking after use-season
1. Disconnect power supply.
3. Remove dust and sundries on the air conditioner.
4. Eliminate accumulated water in chassis (refer to the section of "Drainage way"
for details).
5. Check whether window bracket is damaged or not. If yes, please contact dealer.
Long-time storage
If you don't use the air conditioner for a long time, please maintain it by following
steps for good performance:
Make sure there's no accumulated water in chassis and the heat discharge pipe is
disassembled.
Pull out the plug and wrap the power cord.
Clean the air conditioner and pack it well to prevent dust.
Notice for recovery
Many packing materials are recyclable materials. Please deal with them through
local recycle bin.
If you want to throw away the air conditioner, please contact local division or
consultant service center for the correct disposal method.
71
GB