Fisher & Paykel WH1160HG1 Installation Manual page 5

UNPACK ALL PRODUCTS
Washer and Dryer:
Cut the straps and the line
printed on the top of the
carton. Lift to remove. Discard
braces and corner posts.
Remove any packaging and
accessories from the drum and
base packer.
Dispose of packaging
responsibly.
Fabric Care Cabinet:
Cut the straps and the line
printed on the back of the
carton. Cut to the nearest
corner and remove sleeve.
Discard braces, corner posts
and sleeve.
Remove packaging and
accessories from inside cabinet.
Dispose of packaging
responsibly.
Plinth:
Cut the straps and tape to
open the carton from the top.
Remove the EPS cap before
lifting the plinth out.
Set cardboard aside for later
use. Ensure accessories are
removed from the EPS cap
before discarding EPS and
rubber spacers responsibly.
5