Final Reduction Gear Oil; Drive Belt - KYMCO X-Town 250 ABS Service Manual

3. INSPECTION/ADJUSTMENT

FINAL REDUCTION GEAR OIL

＊
 Place the scooter on its main stand on
level ground.
Remove the transmission fluid drain bolt.
Remove the transmission fluid filler bolt, then
slowly rotate the rear wheel to drain the fluid.
Fill the transmission with the recommend
fluid to the capacity listed below.
Transmission fluid type: SAE 90
Transmission fluid capacity: 0.23 L
Transmission fluid exchanging
capacity: 0.18 L
Install the transmission filler bolt and tighten
it to the specified torque.

DRIVE BELT

Remove the left crankcase cover.
Inspect the drive belt for cracks or excessive
wear.
Replace the drive belt with a new one if
necessary and in accordance with the
Maintenance Schedule.
CVT Check/Clean
Change or clean the air filter every 5000km
Remove set screws on the left crankcase
cap
Remove screws on the clapboard
On the left crankcase
Remove the air filter,change or clean
<Install method>
Istall in the reverse order
<clean method>
Clean the sponge with compressed air and
Clean the stain on left inner crankcase
X-Town250/300 ABS
Oil Filler Bolt
Oil Drain Bolt
Drive Belt
3-8