Fuel Cut-Off Relay - KYMCO X-Town 250 ABS Service Manual

13. FUEL INJECTION SYSTEM
X-Town250/300 ABS
Battery

FUEL CUT-OFF RELAY

INSPECTION
Remove the fuel cut-off relay.
Connect the ohmmeter to the fuel cut-off
relay connector terminals.
Connection: Black – Red/Black
Connect 12 V battery with the fuel cut-off
Fuel Cut-Off Relay
relay connector.
Connection: Blue/Black – Black
There should be continuity only when 12 V
battery connected.
If there is not continuity when the 12 V
battery is connected, replace a fuel cut-off
relay.
REMOVAL
Disconnect the fuel cut-off relay connector
and remove it from frame.
OiL Pressure Controller
Fuel Pump Relay
13-19