Self-Diagnostic Procedures Without; Diagnostic Tool - KYMCO X-Town 250 ABS Service Manual

13. FUEL INJECTION SYSTEM
SELF-DIAGNOSTIC
PROCEDURES WITHOUT

DIAGNOSTIC TOOL

(APPLY to Euro3 model)
SELF-DIAGNOSTIC PROCEDURES
＊
It can be performed without diagnostics
program.
Place the scooter on its main stand.
Put the side stand up and the engine stop
switch is at "RUN".
● Turn key to On position.
● The CELP will be lighting all along and
then off.
● If the engine has problem, the CELP will
blink to show the failure codes.
● There're 12 failure codes for the KEHIN
system.
If the vehicle gets more failure codes, the
CELP will be blinking from a lower number,
then show the higher number after three
seconds. All failure codes would be
appeared repeatedly.
＊
No matter when the "CELP" illuminated
while riding condition, should find out
the cause of the problem as soon as
possible.
Euro 4 Model
● Turn key to On position.
● The CELP will be lighting all along ,the
CELP will be off after starting the engine.
● If the engine has any problem, the CELP
will blink to show the failure codes.
13-7
X-Town250/300 ABS
Upward side
stand
Battery warning indicator
Fi indicator
RUN