Transmission Gear Oil Change; Gear Oil Type; Full Capacity; Exchange Capacity - KYMCO X-Town 300 Manual

Transmission Gear Oil change

1. Stand the scooter by the center stand.
2. Remove the gear oil drain bolt
3. Remove the gear oil filler bolt
rotate the rear wheel to drain the gear oil off.
4. Fill with the recommended oil to reach the capacity
listed below.
5. Install the transmission filler bolt and tighten it to
the specified torque.
Gear oil type: SAE 90
Full capacity: 0 .23 L (0.24 US qt)
Exchange capacity: 0. 18L (0.19 US qt)
CAUTION
Use the genuine engine oil or another with the
same quality and grade to avoid burnout on
the bearing or damage on the gear set.
MAINTENANCE
①
.
②
, and then slowly
CAUTION
Must follow the local regulation and obey the
related prohibition about the disposal of oil.
2
2
1
2
35