Brake Light Switch; Ignition Switch - KYMCO X-Town 250 ABS Service Manual

19. LIGHTS SWITCHES/ FUEL PUMP

BRAKE LIGHT SWITCH

Remove the upper handlebar cover.
Disconnect front or rear brake light switch
connectors and check for continuity between
the switch terminals.
There should be continuity with the front or
rear brake lever squeezed, and there should be
no continuity with the front or rear brake
lever is released.

IGNITION SWITCH

INSPECTION
Remove the front cover.
Disconnect the ignition switch connector and
check the ignition switch for continuity at the
switch side connector terminals.
Continuity should exist between the color
code wires as follows:
Front Brake Light Switch
Rear Brake Light Switch
X-Town250/300 ABS
19-8