Maintenance - Toro 04722 Operator's Manual

Maintenance

Lubricating the Tri-Roller
Lubricate the 2 grease fittings
tri-roller unit after every 15 hours of operation, with
No. 2 lithium grease. Use a hand-operated grease
gun for best results.
1. Wipe each grease fitting with a clean rag.
2. Apply grease to the tri-roller shaft bearings until
you feel pressure
3. Wipe excess grease away.
(Figure 6) on each
(Figure 6).
Figure 6
g018317
4