Advertisement
7.
Repeat steps 2 through 6 for the other tri-roller
units as required.
3
Adding Rear Weight
Parts needed for this procedure:
1
Weight kit, 119-7129 (purchase separately)
Procedure
This machine complies with the ANSI B71.4-2012 and
EN ISO 5395:2013 Standards when equipped with
the Weight Kit, Part No. 119-7129.
Operation
Installing the Electrical
Counterweights
Note:
If the Tri-roller is installed on greensmower
models 04530 or 04540, you must use an additional
hybrid counterweight.
1.
Remove and discard the counterweight bolts.
2.
Install 2 bolts (5/16-18 x 2 3/4 inch) as shown
in
Figure
5.
Note:
These bolts are not included with this kit.
Toro part number: 322-33.
3.
Install 4 spacers (1/8 inch) per bolt between
the counterweight and the tri-roller side plate
(Figure
5).
Note:
These spacers are not included with this
kit. Toro part number: 63-8410.
4.
Install the hybrid auxiliary weight provided with
the traction unit with the provided bolts.
1. Cap screws
Training Period
Before rolling greens, find a clear area and practice
starting, stopping, raising, lowering, and rolling with
the tri-roller.
Operating Tips
Maintain a straight line when rolling. Do not turn when
the tri-rollers are on the ground.
When the edge of the green has been reached,
raise the tri-rollers before turning or stopping. You
must completely raise the tri-rollers before making
turns. Survey the green to determine if there are
any obstacles that will be damaged or will result in
damage to the rollers, such as sprinkler heads and
protruding objects.
3
Figure 5
2. Washers
g254873
Advertisement
