Table of Contents
Advertisement
ABCD
1 Channel, ABCD Parallel
Parallel Channels (ABCD) and (EFGH)
For One Loudspeaker
Full power to one loudspeaker; Use one 2-wire cable, connect to:
• T3+/T4- (Loudspeaker ABCD)
For Multiple Loudspeakers
Full power for multiple loudspeakers in parallel Use up to four 2-wire
cables, connect to:
• T1+/T2- (Loudspeaker E)
• T3+/T4- (Loudspeaker F)
• T5+/T6- (Loudspeaker G)
• T7+/T8- (Loudspeaker H)
CHANNEL CONFIGURATION
Q ABCD
1 Channel: A B C D
Channel Configuration Locked to Design
Possible Combinations
The table below lists the options available in Q-SYS Designer.
Outputs
Configuration / Channels
A B C D
4 Channel
A+B C D
3 Channel, A B Bridged
A+B C+D 2 Channel, A B Bridged C D Bridged
AB C D
3 Channel, A B Parallel
AB C+D
2 Channel, A B Parallel C D Bridged
AB CD
2 Channel A B Parallel C D Parallel
AB+CD
1 Channel, A B Parallel Bridged with C D Parallel EF+GH
ABC D
2 Channel A B G Parallel
ABCD
1 Channel A B C D Parallel
A B = Individual Channels, AB = Parallel Channels, A+B = Bridged Channels
Connect the Loudspeakers
WARNING! There is a potential of having dangerous voltage at the
output terminals on the rear of the amplifier. Use caution not to touch
these contacts. Make sure the Power switch is off prior to making
any connections.
NOTEE: The output connector is capable of handling up to 8 AWG for
stranded wire.
1. Connect the loudspeaker wiring to the 8-pin Euro-style connector as needed for your
amplifier's configuration.
2. Install the female 8-pin Euro-style connector onto the male connector on the rear of the
amplifier as shown in Figure 11.
3. Use a Phillips screwdriver to secure the connector.
IMPORTANT! The DPA-Q series of audio power amplifiers are
high power amplifiers designed for installation use in both Lo-Z and
Hi-Z applications. Proper wiring class/size is required to ensure safe
operation. Based on operating mode, these amplifiers are designed for
use with the following speaker wiring:
• FAST Channel Configuration Mode: Single Channel & Parallel = Class 2 wiring
TD-001585-01-B
All manuals and user guides at all-guides.com
EFGH 1 Channel, EFGH Parallel
CHANNEL CONFIGURATION
Q EFGH
1 Channel: E F G H
Channel Configuration Locked to Design
— Figure 10 —
Outputs
E F G H
E+F G H
E+F G+H
EF G H
EF G+H
EF GH
EFG H
EFGH
OUTPUTS TO SPEAKERS
-
CH D
+
-
CH C
+
-
CH ABCD
CH B
+
-
+
T3
T4
-
CH A
+
In 4-1 Parallel (ABCD or EFGH) only
T1+, T3+, T5+, and T7+ are electrically the same point
T2-, T4-, T6-, and T8- are electrically the same point
Configuration / Channels
4 Channel
3 Channel, E F Bridged
2 Channel, E F Bridged G H Bridged
3 Channel, E F Parallel
2 Channel, E F Parallel G H Bridged
2 Channel E F Parallel G H Parallel
1 Channel, E F Parallel Bridged with G H Parallel
2 Channel E F G Parallel
1 Channel E F G H Parallel
9
OUTPUTS TO SPEAKERS
+
T8
T1
CH E
-
T7
T2
+
T6
T3
CH F
-
T5
T4
+
T4
T5
CH G
-
T3
T6
+
T2
T7
CH H
-
T1
T8
— Figure 11 —
CH EFGH
+
-
T1
T2
+
-
T3
T4
+
-
T5
T6
+
-
T7
T8
Advertisement
Table of Contents
