Table of Contents
Advertisement
8. Attach the remaining sections of the support rails to the rack, as described in step "6" on page 43 in
"Installing the support rails " on page 42.
9. Move the mechanical lift to the front of the rack. Align the inner section of the rails with the mid
section of the rails that are extending from the rack.
10. On each side, push the inner section and middle section of the rails together until they click and will
no longer separate, as described in step "1" on page 50 in "Installing or replacing a 5U expansion
enclosure in a rack " on page 49.
11. Remove the 4U and 1U fascia from the boxes in which they were shipped, as shown in Figure 18 on
page 39.
Figure 18. Packaging for fascia
1
4U fascia (front)
2
1U fascia (power supply units)
12. Attach the 4U and 1U fascia to the front of the enclosure, as described in "Installing or replacing the
fascia" on page 44.
13. Install the drives, as described in "Installing or replacing a drive" on page 46.
14. Replace the top cover, as described in "Installing or replacing the top cover" on page 48.
15. Lower the mechanical lift so that you can remove the remaining foam blocks away from the
expansion enclosure.
16. Slide the latch on the side of each rail and push the expansion enclosure securely into the rack, as
described in steps "4" on page 50 through "6" on page 50 in "Installing or replacing a 5U
expansion enclosure in a rack " on page 49.
17. Remove the cable management arm assembly from its packaging (
18. Attach the cable management arm, as described in "Installing or replacing the cable-management
arm" on page 51.
19. Connect the SAS cables, as described in "Removing and installing a SAS cable" on page 53.
20. Connect the power cables.
Identify the hardware components
You should become familiar with the external components of the 5U expansion enclosure.
Components on the front of the enclosure
Figure 19 on page 40 shows the front of the 5U expansion enclosure. In the figure, all parts are installed
in the enclosure.
2
in Figure 16 on page 38).
Chapter 4. Installing the system hardware 39
Advertisement
Table of Contents
