Table of Contents
Advertisement
Table 12. Enclosure physical characteristics (continued)
Enclosure type Model
Expansion
Storwize
enclosure (12
V5000E
LFF drive slots)
( 2072-12F )
Storwize
V5000E (2072-
E12)
Expansion
Storwize
enclosure (24
V5000E
SFF drive slots)
2072-24F )
Storwize
V5000E (2072-
E24)
Expansion
Storwize
enclosure (92
V5000E
drive slots)
( 2072-92F )
Storwize
V5000E (2072-
E92)
Attention: To avoid potential equipment damage during transport and subsequent loss of data,
see Procedure: Transporting a 5U 92-drive expansion enclosure. The procedure describes what to
do for the following situations.
• When you are powering off a 92F, 92G, or an A9F 5U expansion enclosure because you intend to
transport it to another location
• When you intend to move a rack that contains a 92F, 92G, or an A9F 5U expansion enclosure
The procedure describes how to remove each drive from the 5U enclosure and transport the
enclosure. Removing the drives prevents damage to the drives and makes the lighter enclosure
easier to move.
Warning: 2072-92F or 2072-E92 (5U) expansion enclosure models need 968 mm from the rack
front post to the back of the cable management arm (CMA). There are racks that will not provide
sufficient space to close the rear door. In addition, allow 905 mm from the front post to the back
of the enclosure. To allow space for the power cables, provide 60 - 70 mm from the back of the
enclosure.
Figure 3 on page 10 shows the rack space requirements for the 5U models.
Height
Width
8.7 cm (3.4 in)
48.3 cm (19.0
in)
8.7 cm (3.4 in)
48.3 cm (19.0
in)
222.2 mm
483 mm (19.0
(8.75 in.)
in.)
Depth
Maximum weight
Drive ready
(without
drives)
55.6 cm (21.9
16.4 kg (36.1
in)
lb)
55.6 cm (21.9
16.7 kg (36.8
in)
lb)
968 mm (38.1
67 kg (147.7 lb) 135 kg (297 lb)
in.)
Chapter 2. Environmental requirements 9
Fully
configured
(with drives)
26.7 kg (58.9
lb)
25.0 kg (55.1
lb)
Advertisement
Table of Contents
