IBM Storwize V5000 Gen2 Quick Installation Manual
  1. Manuals
  2. Brands
  3. IBM Manuals
  4. Storage
  5. Storwize V5000 Gen2
  6. Quick installation manual

IBM Storwize V5000 Gen2 Quick Installation Manual

Hide thumbs Also See for Storwize V5000 Gen2:
Table of Contents

Advertisement

Quick Links

IBM Storwize V5000 Gen2

Quick Installation Guide

IBM
GC27-8581-00

Advertisement

Table of Contents
loading

Related Manuals for IBM Storwize V5000 Gen2

Summary of Contents for IBM Storwize V5000 Gen2

  • Page 1: Quick Installation Guide

    IBM Storwize V5000 Gen2 Quick Installation Guide GC27-8581-00...
  • Page 2 The information in the “Safety and environmental notices” on page ix v The information in the IBM Environmental Notices and User Guide (provided on a DVD) This edition applies to IBM Storwize V5000 and is valid until replaced by new editions.

  • Page 3: Table Of Contents

    . xvii Storwize V5000 Gen2 library and related Appendix A. Accessibility features for publications . . xvii IBM Storwize V5000 ..47 How to order IBM publications . xix Related websites . xix Appendix B.
  • Page 4 Storwize V5000 Gen2: Quick Installation Guide...

  • Page 5: Figures

    Example of a Storwize V5010 system with a control enclosure . 4-port Ethernet host interface adapter . . 33 Rear view of a Storwize V5000 Gen2 expansion Example Storwize V5010 configuration with 10 enclosure. Gbps iSCSI-FCoE 4-port host interface adapters 34...
  • Page 6 Storwize V5000 Gen2: Quick Installation Guide...

  • Page 7: Tables

    . 21 Steps for different installation scenarios for Summary of SAS chains and enclosures Storwize V5000 Gen2 systems . Default user name and password for the Storwize V5000 Gen2 control enclosures . management GUI . 43 © Copyright IBM Corp. 2016...
  • Page 8 Storwize V5000 Gen2: Quick Installation Guide...

  • Page 9: Safety And Environmental Notices

    In the preceding examples, the numbers (C001) and (D002) are the identification numbers. 2. Locate the IBM Systems Safety Notices with the user publications that were provided with the Storwize V5000 Gen2 hardware. 3. Find the matching identification number in the IBM System Storage Storwize V5000 Gen2 Safety Notices .

  • Page 10: Caution Notices For The Storwize V5000 Gen2

    “Labels” section. Note: You can find and download the current IBM System Safety Notices by searching for Publication number G229-9054 in the IBM Publications Center.
  • Page 11 CAUTION: The battery contains lithium. To avoid possible explosion, do not burn or charge the battery. Do not: Throw or immerse into water, heat to more than 100°C (212°F), repair or disassemble. (C003) CAUTION: Removing components from the upper positions in the rack cabinet improves rack stability during a relocation.

  • Page 12: Danger Notices For Storwize V5000 Gen2

    (R009) Danger notices for Storwize V5000 Gen2 Ensure that you are familiar with the danger notices for Storwize V5000 Gen2 . Use the reference numbers in parentheses at the end of each notice, such as (C003) for example, to find the matching translated notice in IBM Systems Safety Notices.
  • Page 13 Electrical voltage and current from power, telephone, and communication cables are hazardous. To avoid a shock hazard: v If IBM supplied a power cord(s), connect power to this unit only with the IBM provided power cord. Do not use the IBM provided power cord for any other product.

  • Page 14: Special Caution And Safety Notices

    Do not attempt to lift any objects that weigh more than 18 kg (40 lb) or objects that you think are too heavy for you. v Do not perform any action that causes a hazard or makes the equipment unsafe. Storwize V5000 Gen2: Quick Installation Guide...

  • Page 15: Handling Static-Sensitive Devices

    v Before you start the device, ensure that other personnel are not in a hazardous position. v Place removed covers and other parts in a safe place, away from all personnel, while you are servicing the unit. v Keep your tool case away from walk areas so that other people cannot trip over v Do not wear loose clothing that can be trapped in the moving parts of a device.

  • Page 16: Environmental Notices

    Environmental notices This information contains all of the required environmental notices for IBM Systems products in English and other languages. The IBM Systems Environmental Notices (http://ibm.co/1fBgWFI) information includes statements on limitations, product information, product recycling and disposal, battery information, flat panel display, refrigeration and water-cooling systems, external power supplies, and safety data sheets.

  • Page 17: About This Guide

    IBM TotalStorage products www.ibm.com/storage/support/ Each of the PDF publications in the Table 2 on page xviii library is also available in the IBM Knowledge Center by clicking the number in the “Order number” column: xvii © Copyright IBM Corp. 2016...

  • Page 18: Storwize V5000 Gen2 Library

    Table 3 lists websites that provide publications and other information about the ® Storwize V5000 Gen2 or related products or technologies. The IBM Redbooks publications provide positioning and value guidance, installation and implementation experiences, solution scenarios, and step-by-step procedures for various products.

  • Page 19: How To Order Ibm Publications

    How to get information, help, and technical assistance If you need help, service, technical assistance, or just want more information about IBM products, you will find a wide variety of sources available from IBM to assist you. About this guide...
  • Page 20 Before calling for support, be sure to have your IBM Customer Number available. If you are in the US or Canada, you can call 1 (800) IBM SERV for help and service. From other parts of the world, see http://www.ibm.com/planetwide for the number that you can call.
  • Page 21 At times, you might need expert advice about using a function provided by the system or about how to configure the system. Purchasing the IBM Support Line offering gives you access to this professional advice while deploying your system, and in the future.
  • Page 22 Storwize V5000 Gen2: Quick Installation Guide...

  • Page 23: Chapter 1. Before You Begin The Installation

    2. The steps in Chapter 2, “Installing the Storwize V5000 Gen2 hardware,” on page 19 involve installing the hardware and attaching the data cables and power cords.

  • Page 24: Enclosure

    Complete these steps for each control enclosure and expansion enclosure that you add. Be familiar with the following information v See “Caution notices for the Storwize V5000 Gen2” on page x and “Danger notices for Storwize V5000 Gen2” on page xii for a summary of the situations that can be potentially hazardous to you.
  • Page 25 v Use safe practices when lifting. The fully populated enclosure weighs about 26 kg (57 lbs). At least two people are required to lift and install the enclosure into the rack or to remove an enclosure from the rack.The fully populated enclosure weighs about 37 kg (82 lbs).

  • Page 26: Tools Needed

    Electrical voltage and current from power, telephone, and communication cables are hazardous. To avoid a shock hazard: – If IBM supplied a power cord(s), connect power to this unit only with the IBM provided power cord. Do not use the IBM provided power cord for any other product.

  • Page 27: Reviewing Your Packing Slip

    12-slot Control enclosure for 2.5-inch drives 2078–324 3 years 24-slot Control enclosure for 2.5-inch drives __ v All Storwize V5000 Gen2 systems support the expansion enclosures that are listed in Table 7 on page 6. Chapter 1. Before you begin the installation...

  • Page 28: Storwize V5000 Gen2 Expansion Enclosures

    Table 7. Storwize V5000 Gen2 expansion enclosures Machine IBM Storwize V5000 Gen2 Model Warranty Description type / model 2077-12F 1 year 12-slot Expansion enclosure for 3.5-inch drives 2077-24F 1 year 24-slot Expansion enclosure for 3.5-inch v Storwize V5010 drives v Storwize V5020...

  • Page 29: Identify The Hardware Components

    Identify the hardware components The following graphics identify the hardware components and port locations for the control enclosure and expansion enclosure on Storwize V5000 Gen2 systems. Control enclosure components The following figures show the rear view of the control enclosures on Storwize V5000 Gen2 systems.

  • Page 30: Data Ports On The Rear Of The Storwize V5010

    Figure 5. Data ports on the rear of the Storwize V5020 control enclosure Figure 6 shows the data ports on the back of a Storwize V5030 node. Figure 6. Data ports on the rear of the Storwize V5030 control enclosure Storwize V5000 Gen2: Quick Installation Guide...

  • Page 31: Rear View Of A Storwize V5000 Gen2 Expansion

    Port 1 is used to connect to a SAS expansion port on a node canister or port 2 of another expansion canister. Figure 8. SAS ports and LEDs in rear view of a Storwize V5000 Gen2 expansion canister Support rails and enclosures Storwize V5000 Gen2 systems use the same rails and enclosures for both control and expansion enclosures.

  • Page 32: Direct Current Power Supply Units

    Figure 9. Enclosure support rails on Storwize V5000 Gen2 Direct current power supply units When feature code AHPB is used, a direct current (DC) power supply can be installed in a Storwize V5000 Gen2 enclosure. This section describes the additional information you need to know when using the DC power models.
  • Page 33 Electrical voltage and current from power, telephone, and communication cables are hazardous. To avoid a shock hazard: v If IBM supplied a power cord(s), connect power to this unit only with the IBM provided power cord. Do not use the IBM provided power cord for any other product.
  • Page 34 The required circuit breaker rating is 20 amps. DC power supply unit connectors and indicators Each Storwize V5000 Gen2 enclosure can contain two DC power supply units. Each power supply unit can provide power to the whole enclosure. The power supply units have the components that are shown in Figure 10 on page...

  • Page 35: Dc Power Supply Unit Connectors And

    Not used. Connecting a DC power supply to a DC power source A Storwize V5000 Gen2 enclosure that is DC powered contains two DC power supply units (PSUs). Each unit must be connected to a suitable -48V DC power source. To provide redundancy in a power circuit failure, connect the two PSUs to different DC power sources.

  • Page 36: Dc Cable Wire Color Coding

    Use the supplied cables to connect the DC PSUs to the power sources. Use only the IBM supplied DC power cable (IBM part number 00AR087) to connect the unit to a DC power source. Each PSU cable must be protected by a 20A circuit breaker. These instructions assume that the circuit breaker is separate from the DC power distribution unit.

  • Page 37: Direct Current Power Replaceable Units

    Table 11. Direct current power replaceable units Description FRU part number Customer replaced Direct current power supply 00AR231 Direct current power cable 00AR087 The procedure to remove and replace the DC power supply unit is the same as the AC power supply procedure. When replacing the DC power cable, follow the instructions for disconnecting cables from the DC power distribution unit.

  • Page 38: Verify Environmental Requirements

    The environmental and electrical requirements for the physical site must be met to ensure that your system works reliably. Before installing a Storwize V5000 Gen2 system, you must verify that adequate space in a suitable rack is available. You must also ensure that the requirements for power and environmental conditions are met.
  • Page 39 v Add the fourth expansion directly above the second, and so on. Chapter 1. Before you begin the installation...
  • Page 40 Storwize V5000 Gen2: Quick Installation Guide...

  • Page 41: Chapter 2. Installing The Storwize V5000 Gen2 Hardware

    Installing support rails for Storwize V5000 Gen2 systems Storwize V5000 Gen2 systems use the same rails for control and expansion enclosures. Before you install a control or expansion enclosure, you must first install the support rails for it.

  • Page 42: Installing The Rail Spring

    3. Working at the front of the rack cabinet, identify the two standard rack units (2U) of space in the rack into which you want to install the support rails. Figure 13 on page 21 shows two rack units with the front mounting holes identified. Storwize V5000 Gen2: Quick Installation Guide...

  • Page 43: Hole Locations In The Front Of The Rack

    Unscrew the medium pins and replace with the large pins supplied with the rails. 5. At each end of the rail, grasp the tab and pull firmly to open the hinge bracket. (See Figure 14 on page 22.) Chapter 2. Installing the Storwize V5000 Gen2 hardware...

  • Page 44: Opening The Hinge Brackets

    11. Secure the rear of the rail to the rear rack flange with an M5 screw. 12. Repeat the steps to secure the opposite rail to the rack cabinet. 13. Repeat the procedure to install rails for each additional control enclosure. Storwize V5000 Gen2: Quick Installation Guide...

  • Page 45: Installing Enclosures For Storwize V5000 Gen2 Systems

    (see Figure 17 on page 24). Note: The rails are not designed to hold an enclosure that is partially inserted. The enclosure must always be in a fully inserted position. Chapter 2. Installing the Storwize V5000 Gen2 hardware...

  • Page 46: Connecting Sas Cables To Storwize V5000 Gen2 Expansion Enclosures

    Rotate the end cap down until it snaps into place. d. Ensure that the inside surface of the end cap is flush with the chassis. Connecting SAS cables to Storwize V5000 Gen2 expansion enclosures If you have installed expansion enclosures, you must connect them to a Storwize V5000 Gen2 control enclosure.
  • Page 47 Connect SAS port 1 of the right node canister in the control enclosure to SAS port 1 of the right expansion canister in the first expansion enclosure. Figure 18 on page 26 shows how to connect SAS cables on a Storwize V5010 system. Chapter 2. Installing the Storwize V5000 Gen2 hardware...

  • Page 48: Connecting The Sas Cables To A Storwize V5010

    Figure 18. Connecting the SAS cables to a Storwize V5010 system Figure 19 on page 27 shows how to connect SAS cables on a Storwize V5020 system. Storwize V5000 Gen2: Quick Installation Guide...

  • Page 49: Connecting The Sas Cables To A Storwize V5020

    Figure 19. Connecting the SAS cables to a Storwize V5020 system Figure 20 on page 28 shows how to connect SAS cables on a Storwize V5030 system. In this figure, two expansion chains are connected to the Storwize V5030 system. Chapter 2. Installing the Storwize V5000 Gen2 hardware...

  • Page 50: Connecting The Sas Cables To A Storwize V5030

    Note: Storwize V5010 and Storwize V5020 systems support only one expansion chain. a. Connect SAS port 2 of the left node canister in the control enclosure to SAS port 1 of the left expansion canister in the second expansion enclosure. Storwize V5000 Gen2: Quick Installation Guide...

  • Page 51: Sas Cabling Guidelines

    For Storwize V5030 systems only, no more than 10 expansion enclosures can be chained to SAS port 2 of a node canister. The expansion enclosures in this chain should be installed above the control enclosure. Chapter 2. Installing the Storwize V5000 Gen2 hardware...

  • Page 52: Connecting Ethernet Cables To Node Canisters

    Refer to “Connecting SAS cables to Storwize V5000 Gen2 expansion enclosures” on page 24 for examples of SAS cable connections on each Storwize V5000 Gen2 system. Connecting Ethernet cables to node canisters The control enclosures on Storwize V5000 Gen2 systems have several Ethernet ports on the rear of each node canister.

  • Page 53: Connecting The Ethernet Cables To A Storwize V5010 System

    In Figure 24 on page 32, the technician port is identified by the green cable. Note: Never use the technician port to provide an Ethernet connection to the system. Do not connect the Ethernet technician port to a network Chapter 2. Installing the Storwize V5000 Gen2 hardware...

  • Page 54: Connecting Ethernet Cables To 1 Gbps Iscsi 4-Port Host Interface Adapters

    Ethernet cables to connect the system to your Ethernet SAN. About this task Each Storwize V5000 Gen2 system has two Ethernet ports, port 1 and port 2, that are built into the canister. When a 4-port Ethernet host interface adapter is installed, the port number starts at 3.

  • Page 55: Connecting Fibre Channel Cables To A 10 Gbps Iscsi-Fcoe 4-Port Host Interface Adapter

    To provide redundant connectivity, connect both node canisters in a control enclosure to the same networks. Results Figure 26 on page 34 shows an example Storwize V5010 configuration that uses 10 Gbps iSCSI-FCoE 4-port host interface adapters. Chapter 2. Installing the Storwize V5000 Gen2 hardware...

  • Page 56: Example Storwize V5010 Configuration With

    Figure 28 shows an example of a Storwize V5030 configuration that uses 10 Gbps iSCSI-FCoE 4-port host interface adapters. Figure 28. Example Storwize V5030 configuration with 10 Gbps iSCSI-FCoE 4-port host interface adapters Storwize V5000 Gen2: Quick Installation Guide...

  • Page 57: Connecting Fibre Channel Cables To A Fibre Channel Host Interface Adapter

    Connecting Fibre Channel cables to a Fibre Channel host interface adapter If your Storwize V5000 Gen2 system has 16 Gbps Fibre Channel 4-port host interface adapters installed, you can use Fibre Channel cables to connect them to your Fibre Channel SAN.

  • Page 58: Connecting A Control Enclosure To A Host With Onboard Sas Connectors

    Storwize V5010 or Storwize V5030 systems. About this task Two types of SAS cables are used for host attachment, depending on the requirements of the host. v Mini SAS HD to Mini SAS HD (Figure 31 on page 37) Storwize V5000 Gen2: Quick Installation Guide...

  • Page 59: Mini Sas Hd To Mini Sas Hd Cable

    To install the cables, complete the following steps. 1. Connect the required number of SAS cables. Refer to the “Planning” section of the IBM Knowledge Center for instructions on determining the number of cables required. Note: When connecting to the SAS ports on the left side of the node canister, each host must be connected to both canisters.

  • Page 60: Location Of Available Sas Ports On A Storwize V5020 System

    Figure 33 shows the location of the onboard 12 Gbps SAS ports on a Storwize V5020 system. In this example, the optional 4 port 12 Gbps SAS host adapter is also installed. SAS HOST Figure 33. Location of available SAS ports on a Storwize V5020 system Storwize V5000 Gen2: Quick Installation Guide...

  • Page 61: Powering On The System

    The enclosure does not have power switches. Note: Each enclosure has two power supply units. To provide power failure redundancy, connect the two power cords to separate power circuits. Chapter 2. Installing the Storwize V5000 Gen2 hardware...

  • Page 62: Node Canister Leds

    The canister is ready with no critical errors when Power is illuminated, Status is flashing, and Fault is off. If a canister is not ready, refer to the “Procedure: Understanding the system status using the LEDs” topic in “Troubleshooting”. Storwize V5000 Gen2: Quick Installation Guide...

  • Page 63: Chapter 3. Configuring The System

    Microsoft Internet Explorer (IE) 11 and Microsoft Edge v Google Chrome 46 IBM supports higher versions of the browsers if the vendors do not remove or disable function that the product relies upon. For browser levels higher than the versions that are certified with the product, customer support accepts usage-related and defect-related service requests.
  • Page 64 3. Enable file download on IE 10 and 11 running on Windows 2012. a. In Internet Explorer, click Tools > Internet Options. b. On the Internet Options window, select the Security tab. c. On the Security tab, click the Internet zone. Storwize V5000 Gen2: Quick Installation Guide...

  • Page 65: User Name And Password For System Initialization

    User name and password for system initialization During the initialization procedure, you need to log in to the management GUI for the Storwize V5000 Gen2 system. The default user name and password for the management GUI are listed in Table 14.

  • Page 66: Storwize V5010 Technician Port

    Figure 36. Storwize V5010 technician port Figure 37. Storwize V5020 technician port Storwize V5030 systems have a dedicated technician port. Figure 38 on page 45 shows the location of the port ( T ). Storwize V5000 Gen2: Quick Installation Guide...

  • Page 67: Adding An Expansion Enclosure To An Existing System

    Figure 38. Storwize V5030 technician port 4. Connect an Ethernet cable between the port of the personal computer that is configured in step 2 on page 44 and the technician port. After the connection is made, the system will automatically configure the IP and DNS settings for the personal computer if DHCP is available.

  • Page 68: Adding A Control Enclosure To An Existing Storwize V5030 System

    Fibre Channel or FCoE ports to connect to each other. 5. Start the management GUI. 6. Go to Monitoring > System. 7. On the System page, select Actions > Add Enclosures. 8. Continue to follow the on-screen instructions. Storwize V5000 Gen2: Quick Installation Guide...

  • Page 69: Appendix A. Accessibility Features For Ibm Storwize V5000

    See your browser or screen-reader software Help for a list of shortcut keys that it supports. IBM and accessibility See the IBM Human Ability and Accessibility Center for more information about the commitment that IBM has to accessibility. © Copyright IBM Corp. 2016...
  • Page 70 Storwize V5000 Gen2: Quick Installation Guide...

  • Page 71: Appendix B. Where To Find The Statement Of Limited Warranty

    The Statement of Limited Warranty is available in both hardcopy format and in the Storwize V5000 information center. The Statement of Limited Warranty is shipped (in hardcopy form) with your product. It can also be ordered from IBM (see Table 2 on page xviii for the part number). © Copyright IBM Corp. 2016...
  • Page 72 Storwize V5000 Gen2: Quick Installation Guide...

  • Page 73: Notices

    Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead.
  • Page 74 The materials at those websites are not part of the materials for this IBM product and use of those websites is at your own risk. IBM may use or distribute any of the information you provide in any way it believes appropriate without incurring any obligation to you.

  • Page 75: Trademarks

    IBM, therefore, cannot guarantee or imply reliability, serviceability, or function of these programs. The sample programs are provided "AS IS", without warranty of any kind. IBM shall not be liable for any damages arising out of your use of the sample programs.

  • Page 76: Industry Canada Compliance Statement

    Member States relating to electromagnetic compatibility. IBM cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product, including the fitting of non-IBM option cards. Attention: This is an EN 55022 Class A product. In a domestic environment this product might cause radio interference in which case the user might be required to take adequate measures.

  • Page 77: People's Republic Of China Class A Statement

    Klasse A ein. Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu installieren und zu betreiben. Des Weiteren dürfen auch nur von der IBM empfohlene Kabel angeschlossen werden. IBM übernimmt keine Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produkt ohne Zustimmung der IBM verändert bzw.

  • Page 78: Taiwan Class A Compliance Statement

    Japan VCCI Council Class A statement This explains the Japan Voluntary Control Council for Interference (VCCI) statement. Japan Electronics and Information Technology Industries Association Statement This statement explains the Japan JIS C 61000-3-2 product wattage compliance. See Knowledge Center Storwize V5000 Gen2: Quick Installation Guide...

  • Page 79: Korean Communications Commission Class A Statement

    This statement explains the Japan Electronics and Information Technology Industries Association (JEITA) statement for products less than or equal to 20 A per phase. This statement explains the JEITA statement for products greater than 20 A, single phase. This statement explains the JEITA statement for products greater than 20 A per phase, three-phase.
  • Page 80 Storwize V5000 Gen2: Quick Installation Guide...

  • Page 81: Index

    Fibre Channel cables 33 connecting to power source 14 environmental ix, xvi connectors 12 safety ix LEDs 12 replaceable units 15 Germany electronic emission compliance disk drives statement 54 large form factor 5 © Copyright IBM Corp. 2016...
  • Page 82 Storwize V5000 library related publications xvii superuser 43 Taiwan contact information 56 electronic emission notice 56 technical assistance xx trademarks 53 user name 43 web browsers configuring 41 requirements 41 websites xix Storwize V5000 Gen2: Quick Installation Guide...
  • Page 84 IBM® Printed in USA GC27-8581-00...

Table of Contents