Installing The Rail Spring - IBM Storwize V5000E Quick Installation Manual

Figure 9. Enclosure support rails
2. Install a spring on the rail rail.
a) Push one looped end of a spring over one stud on the inside of the rail. (See Figure 10 on page
24.)
b) Stretch the spring slightly and push the other looped end of the spring onto the other stud on the
inside of the rail.
Figure 10. Installing the rail spring
3. Working at the front of the rack cabinet, identify the two standard rack units (2U) of space in the rack
into which you want to install the support rails.
Figure 11 on page 25 shows two rack units with the front mounting holes identified.
24 IBM Storwize V5000E : Storwize V5000E Quick Installation Guide