Table of Contents
Advertisement
FM Operation
Press SOURCE repeatedly to select FM mode.
Auto Scan
Press and hold the SKIP+/SKIP– button until the tuner starts searching for a station. Once a
station has been found, the scanning will stop automatically.
The search may not stop at a station with a very weak signal.
Manual Scan
Press SKIP+/SKIP– button repeatedly until your desired frequency is reached.
With FM radio it may be necessary to fine tune each station by pressing the SKIP+/SKIP– buttons
repeatedly. Each press will adjust the frequency by 0.05MHz. If reception is still poor adjust the position of
the aerial or try moving the radio to another location.
For Better Reception
Fully unwind the aerial. Extend the aerial and place it in the
position that offers the best sound reception.
Presetting Stations
You can store up to 20 of your favourite FM stations to
the memory. This will enable you to access your favourite
stations quickly and easily.
1. To store a preset, you must first be listening to the
station that you would like to save, press and hold
PRESET. The display will show "MEM" and "P0#"' .
2. Press SKIP+/SKIP– button to select your desired preset station number and then press
PRESET to confirm.
Recalling a Preset Station
1. Once you have saved a station to one of the preset buttons, you can recall it by pressing
PRESET button.
2. Press SKIP+/SKIP– button to select your desired preset station number.
3. Press PRESET button to confirm the selection to recall the preset station.
The stored stations will be saved into the memory and power off will not erase it. Storing a new station
into a preset location will erase the previously stored station in that location.
Aerial
AUX-IN
AC-IN~
Rear View of Unit
13
Advertisement
Table of Contents
