Fm Operation; Auto Scan; Manual Scan; For Better Reception - JVC RC-D327B Instruction Manual

FM Operation

Press SOURCE repeatedly to select FM mode.

Auto Scan

Press and hold the SCAN/
station has been found, the scanning will stop automatically.
The search may not stop at a station with a very weak signal.

Manual Scan

Press
With FM radio it may be necessary to fine tune each station by pressing the
Each press will adjust the frequency by 0.05MHz. If reception is still poor adjust the position of the aerial
or try moving the radio to another location.

For Better Reception

Fully unwind the aerial. Extend the aerial and place it in the position
that offers the best sound reception.

Presetting Stations

You can store up to 10 of your favourite FM stations to the memory.
This will enable you to access your favourite stations quickly and
easily.
1. To store a preset, you must first be listening to the station that
you would like to save, press and hold MENU/PRESET/CLOCK.
The display will show 'Preset Store <1: Empty>' .
2. Press
confirm.
3. The station will be stored and the screen will then show 'Preset # Stored' .

Recalling a Preset Station

1. Once you have saved a station to one of the preset buttons, you can recall it by pressing
FOLDER/RECALL.
2. Press
3. Press /ENTER to confirm the selection.
The stored stations will be saved into the memory and power off will not erase it. Storing a new station
into a preset location will erase the previously stored station in that location.
18
button until the tuner starts searching for a station. Once a
repeatedly until your desired frequency is reached.
to select your desired preset station number and then press /ENTER to
to select your desired preset station number.
buttons repeatedly.
Aerial
Rear View of Unit