Table of Contents
Advertisement
Mains Power
Always check you have completely switched off the unit, before you change or disconnect the power
supply.
1. Check that the power voltage shown on the rating label located on the bottom of
the unit, corresponds to your local power supply. If it does not, consult your dealer or
service centre.
2. Connect the mains cable to the AC~IN socket and the mains socket. The unit is now
connected and ready for use.
3. To switch the unit off completely, withdraw the mains cable from the mains socket.
4. Install the unit near a mains socket where the mains plug can be easily reached.
Disconnect the mains cable from the mains socket to protect your unit during heavy thunderstorms.
Children could seriously injure themselves as the free end of the cable may still be live if only the
connector is removed from the mains socket at the back of the unit.
10
AUX-IN
AC-IN~
Advertisement
Table of Contents
