Installation Of Indoor Unit - Toshiba MMK-AP0054MHP1-E1 Service Manual

SMMS High-Wall Type
4.

Installation of Indoor Unit

WARNING
Install the air conditioner certainly to sufficiently withstand the weight.
If the strength is insufficient, the unit may fall down resulting in human injury.
Perform a specified installation work to guard against strong wind or earthquake.
An incomplete installation can cause accidents by the units falling and dropping.
REQUIREMENT
Strictly comply with the following rules to prevent damage of the indoor units and human injury.
• Do not put a heavy article on the indoor unit. (Even units are packaged)
• Carry in the indoor unit as it is packaged if possible. If carrying in the indoor unit unpacked by necessity,
buse buffering cloth or other material to not damage the unit.
• To move the indoor unit, do not apply force to the refrigerant pipe, drain pan, foamed parts, or resin parts
or other parts.
• Carry the package by two or more persons, and do not bundle it with plastic band at positions other than
specified.
Be careful to the following items at installation of the unit.
• Considering air discharge direction, select an installation place where discharge air can circulate evenly
in a room. Avoid to install the unit at place with "NO GOOD" mark in the right figure.
Good installation place
Cooled well all over.
OK
Bad installation place
80
FILE NO. SVM-16045
NO GOOD
: Not cooled well.
Screen
Installation Manual