Table of Contents
Advertisement
Operations: Automatic Cord Rewind
1
Gently pull out power cord and stop
when yellow band is visible on the cord.
Do not pull power cord beyond the red
line. Plug cord into electrical outlet.
Maintenance: Empty Dirt Tank
1
Remove tank by pressing the release
button on the tank handle.
3
Empty contents
of dirt tank into
trash container,
and gently shake
the top handle to
remove build up.
NOTE: If you notice excess build up around the top of the tank, before removing
top piece, gently tap the tank to allow contents to settle.
2
To return cord, turn vacuum power
switch off and remove plug from outlet.
Hold plug and press automatic cord
rewind button located on the lower side
of the unit to wind cord into reel. Do not
allow plug to whip when rewinding.
2
4
Place the top handle
straight down into
the dirt tank. Align
the latch arrows and
gently twist clockwise.
When fully assembled,
the tank will click into
place. Replace the tank
back onto the vacuum
– it will click when fully
installed.
Grasp handle on
back of tank with
one hand and the
top handle with
the other. Twist
the top handle
counterclockwise
until latches release.
Pull the top handle
straight up from the
dirt tank.
www.BISSELL.com
7
Advertisement
Table of Contents
