Table of Contents
Advertisement
Disassembly
Removing and Replacing the Earpiece Speaker
G
28
1.
Remove the battery cover, battery, SIM, antenna cover, rear housing, and
transceiver board as described in the procedures.
SPEAKER
DISASSEMBLY TOOL
Figure 14. Removing the Earpiece Speaker
2.
Using the flat end of the disassembly tool, pry the earpiece speaker from its
cavity in the front housing as shown in Figure 17.
The earpiece speaker is fastened to the front housing with adhesive. Exercise care
when removing to prevent damage to the front housing.
3.
To replace the earpiece speaker, remove the protective backing from the new
earpiece speaker, then press the earpiece speaker into place in its front housing
cavity. Be sure the speaker is straight, fully seated within the cavity, and
positioned so its terminals will contact the transceiver board when
reassembled.
4.
Replace the transceiver board, rear housing, antenna cover, SIM, battery, and
battery cover as described in the procedures.
October 14, 2002
FRONT HOUSING
Product Family C25
020588-o
6881041B25
Advertisement
Table of Contents
Troubleshooting
