Disassembly
Removing and Replacing the Antenna Cover
Removing and Replacing the Antenna Assembly
20
1.
Remove the battery cover, battery, and SIM as described in the procedures.
2.
The antenna cover is secured to the rear housing by three latches Their location
inside the antenna cover is indicated by the red arrows. Use the flat end of the
disassembly tool, beginning at the first location indicated by the red arrow to
carefully pry the antenna cover off of the rear housing. See Figure 7.
ANTENNA COVER
3
Figure 7. Removing the Antenna Cover
3.
To replace, carefully align the antenna cover with the top of the rear housing.
4.
Press the antenna cover firmly into place onto the rear housing.
5.
Replace the SIM, battery, and battery cover as described in the procedures.
1.
Remove the battery cover, battery, SIM, and antenna cover as described in the
procedures.
2.
Using the Torx driver with a T5 bit, remove the 2 screws securing the antenna
as shown in Figure 9 and set aside for reuse.
October 14, 2002
1
2
Product Family C25
020581-o
6881041B25