Table of Contents
Advertisement
Level 1 and 2 Service Manual
Removing and Replacing the Subscriber Identity Module (SIM)
6881041B25
4.
To replace, align the battery with the battery compartment so the contacts on
the battery match the battery contacts in the phone.
5.
Slide the top of the battery into the receptacle molded into the housing, then
press the bottom end of the battery securely into the battery compartment until
it locks into place.
6.
Replace the battery cover as described in the procedures.
1.
Remove the battery cover and battery as described in the procedures.
2.
Slide the SIM in the direction of the arrow to remove it from the SIM holder
as shown in Figure 6.
Figure 6. Removing the SIM
3.
To replace, carefully slide the SIM into the SIM holder. Be sure the SIM is
correctly positioned to contact the terminals.
4.
Replace the battery, and battery cover as described in the procedures.
October 14, 2002
SIM HOLDER
SIM
Disassembly
020580-o
19
Advertisement
Table of Contents
Troubleshooting
