Roland M-480 Quick Start Manual page 10

Functionality Added in M-480 Ver. 1.6
The Expanded User Settings
Always Boot in GUEST Mode
You can make the unit always boot in the GUEST mode when you turn it on.
1.
Call up the USER screen
Press the [DISP] in USER section to call up the USER screen.
fig.user-screen.eps
2.
Make it to boot in GUEST mode
Check [Startup as GUEST]. While this is checked, the unit will always boot in GUEST mode setting.
fig.start-up-as-guest.eps
Prohibit Specified Operations
You can edit the user level to prohibit the specified operations. The user level settings can be carried out by the users other than
ADMIN.
* If you are using with ADMIN and keep the user preferences, create a new user setting that takes over the current settings.
Create a New User Setting that Takes Over the Current Settings
1.
Connect a USB memory
Connect a USB memory to the USB MEMORY port of the M-480.
2.
Call up the USER screen
Press [DISP] in USER section to call up the USER screen.
fig.user-screen.eps
10