Removal Of The Ice Control Probe - Cornelius 2 Flavor Training Manual

Quest Juice Training Manual
R
EMOVAL OF THE
1. Carefully turn the chassis over to gain access
to the probe assembly.
Cut the wire tie holding the probe assembly
only. Push up and slide the probe assembly
off the bracket. DO NOT REMOVE THE
BRACKET.
2. The connector must be disassembled to pass
the wire leads through the water bath cover.
3. Carefully remove the grommet from the water
bath cover.
4. With the wire loose, pass the connectors first
through the grommet and the water bath
cover itself.
Publication Number: TP00968
I C P
CE ONTROL ROBE
BE SURE TO REMEMBER THE WIRE
ORDER WHEN RE-ASSEMBLING
Current version
GRAY wire
cover
Yellow
Orange
Purple
Early version
BLACK wire
Blue
Brown
Green/Yellow
- 26 -
cover
© 2004, IMI Cornelius Inc.