Removal Of The Cooling Cabinet - Cornelius 2 Flavor Training Manual

Quest Juice Training Manual
R
EMOVAL OF THE
1. Remove (4) 7/16" nuts from the under side of
the cabinet frame. Current productions uses
(2) nuts only.
2. Cut the wire tie from the wire bundle in the
rear of the unit, just above the condenser.
3. Disconnect the cooling cabinet wire harness.
4. Remove the insulation from around the inlet
and outlet fittings of the heat exchange.
Remove the locking clips from the inlet and
outlet fittings.
5. Insert the screwdriver blade against the lock-
ing ring and pull down on the hose.
Publication Number: TP00968
C C
OOLING ABINET
- 22 - © 2004, IMI Cornelius Inc.