Table of Contents
Advertisement
4-1 Installation Conditions
Decelerator Installation Conditions
Using Another Company's Decelerator (Reference)
If the system configuration requires another company's decelerator to be used in combination
with an OMNUC G5-Series motor, select the decelerator so that the load on the motor shaft
(i.e., both the radial and thrust loads) is within the allowable range. (Refer to "Characteristics"
(P.3-2) for details on the allowable loads for the motors.)
Also, select the decelerator so that the allowable input rotation speed and allowable input
torque of the decelerator are not exceeded.
4
4-6
OMNUC G5-Series AC Servo Drives Users Manual (Built-in MECHATROLINK-II communications type)
Advertisement
Table of Contents
