Items To Check After Unpacking - Omron R88D-KN ML2 Sries User Manual

Items to Check after Unpacking

After unpacking, check the following items.
 Is this the model you ordered?
 Is there any damage sustained during shipment?
Accessories of This Product
Safety Precautions document x 1 copy
 Connectors, mounting screws, mounting brackets, and other accessories other than those in the
table below are not supplied. They must be prepared by the customer.
The safety bypass connector is required when the safety function is not used. To use the safety
function, provide a Safety I/O Signal Connector separately.
 If any item is missing or a problem is found such as Servo Drive damage, contact the OMRON
dealer or sales office where you purchased your product.
Connector for Main circuit power
Specifications
circuit power supply terminals
50 W
Single-
100 W
phase 100
200 W
VAC
400 W
100 W
200 W
Single-
400 W
phase/3-
750 W
phase 200
VAC
1 kW
1.5
kW
2 kW
3-phase
3 kW
200 VAC
5 kW
600 W
1 kW
1.5
3-phase
kW
400 VAC
2 kW
3 kW
5 kW
OMNUC G5-Series AC Servo Drives Users Manual (Built-in MECHATROLINK-II communications type)
supply terminals and Control
Items to Check after Unpacking
Connector for External
Regeneration Resistor
connection terminals and
Motor connection terminals
Included

Included

Safety
bypass
connector
Included
Included
13