Commissioning Deltav For G3 Profibus (Dpv1) With Ams Suite - Emerson Aventics G3 Series Technical Manual

13.6

Commissioning DeltaV for G3 Profibus (DPV1) with AMS Suite

Prepare the G3 Aventics Profibus Node for communication
Supply power to the G3 Profibus node and connect it to the AMS device and supply power. Using the G3 Profibus
node's integrated graphic display set the required node address (page 5-28) and enable Profibus mode DPV1.
PROFIBUS MODE
DPV0
PROFIBUS MODE
DPV1
ACCEPT
DPV1 Y N
SAVE SETTINGS
NOW LATER
G3 Series PROFIBUS-DP
1.
2.
3.
TDG3PTTM1-11EN
Subject to change without notice
www.asco.com
TM Technical Manual
Profibus Mode Settings
Press the SET button to highlight mode
Press the NEXT button to scroll the choices for PROFIBUS
MODE
select DPV1
a. DPV0
b. DPV1
c. RETURN
Press the SET button to confirm your choice.
Press the NEXT button to select Yes to accept the setting
a. Selecting Yes will take you to the following
menu.
SETTINGS
Press the SET button to confirm your choice
Saved Setting Steps
Press the NEXT button to select either NOW
a.
b. Selecting NOW will cause the node to reset and
apply the new setting.
Press the SET button to confirm your choice.
07/2020
SAVE
13-126