13.4
Commissioning G3 Profibus with Siemens TIA Portal Software
Follow your Siemens software help guide to install the G3 Profibus GSD file. Once the GSD file is installed select the
correct profibus mode based on the GSD file selected. Please refer to Profibus GSD File/Mode Selection page 13-
116.
Once the GSD file is installed select the various components to assemble your G3 manifold configuration and I/O
map.
1.
From the "Project Tree" (left panel) double click "Devices and networks".
2.
From the "Hardware catalog" (right panel), select the other field devices.
G3 Series PROFIBUS-DP
TDG3PTTM1-11EN
Subject to change without notice
www.asco.com
TM
Technical Manual
07/2020
13-117