Table of Contents
Advertisement
4.5
Ground Wiring
All Aventics communication nodes should be grounded during the installation process. These grounding guidelines can
be found in National Electrical code IEC 60204-1 or EN 60204-1.
CHASSIS GROUND
CONNECTION POINT
CHASSIS GROUND
CONNECTION POINT
Proper grounding will alleviate and prevent many intermittent problems with network
•
communication.
When grounding to a machine frame, please ensure that the machine frame itself is
•
already properly grounded.
Better grounding can be achieved when larger diameter (lower gauge) wire is used.
•
CAUTION
G3 Series PROFIBUS-DP
500 Series
2000 Series
TDG3PTTM1-11EN
Subject to change without notice
www.asco.com
Technical Manual
TM
07/2020
4-22
Advertisement
Table of Contents
