Table of Contents
Advertisement
• FQXSPNM4000I: Management Controller [arg1] Network Initialization Complete.
This message is for the use case where a Management Controller network has completed initialization.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - BMC Network event
SNMP Trap ID: 37
CIM Prefix: IMM CIM ID: 0001
User Action:
Information only; no action is required.
• FQXSPNM4001I: Ethernet Data Rate modified from [arg1] to [arg2] by user [arg3].
This message is for the use case where a user modifies the Ethernet Port data rate.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0003
User Action:
Information only; no action is required.
• FQXSPNM4002I: Ethernet Duplex setting modified from [arg1] to [arg2] by user [arg3].
This message is for the use case where A user modifies the Ethernet Port duplex setting.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0004
User Action:
Information only; no action is required.
• FQXSPNM4003I: Ethernet MTU setting modified from [arg1] to [arg2] by user [arg3].
This message is for the use case where a user modifies the Ethernet Port MTU setting.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0005
User Action:
Information only; no action is required.
• FQXSPNM4004I: Ethernet locally administered MAC address modified from [arg1] to [arg2] by user
[arg3].
58
ThinkSystem SR860 V2 Messages and Codes Reference
Advertisement
Table of Contents
