Table of Contents
Advertisement
Table 3. Events organized by severity (continued)
Message String
Event ID
FQXSFIO0021I
PCIe DPC software triggering occurred in physical [arg1] number
[arg2].
FQXSFMA0001I
DIMM [arg1] Disable has been recovered. [arg2]
FQXSFMA0002I
The uncorrectable memory error state has been cleared.
FQXSFMA0006I
[arg1] DIMM [arg2] has been detected, the DIMM serial number is
[arg3].
FQXSFMA0007I
[arg1] DIMM number [arg2] has been replaced. [arg3]
FQXSFMA0008I
DIMM [arg1] POST memory test failure has been recovered. [arg2]
FQXSFMA0009I
Invalid memory configuration for Mirror Mode has been recovered.
[arg1]
FQXSFMA0010I
Invalid memory configuration for Sparing Mode has been recovered.
[arg1]
FQXSFMA0011I
Memory population change detected. [arg1]
FQXSFMA0012I
The PFA of DIMM [arg1] has been deasserted.
FQXSFMA0013I
Mirror Fail-over complete. DIMM [arg1] has failed over to to the
mirrored copy. [arg2]
FQXSFMA0014I
Memory spare copy initiated. [arg1]
FQXSFMA0015I
Memory spare copy has completed successfully. [arg1]
FQXSFMA0026I
DIMM [arg1] Self-healing, attempt post package repair (PPR)
succeeded at Rank [arg2] Sub Rank [arg3] Bank [arg4] Row [arg5] on
Device [arg6]. [arg7]
FQXSFMA0029I
The PFA of DIMM [arg1] has been deasserted after applying PPR for
this DIMM. [arg2]
FQXSFMA0046I
DIMM [arg1] is Intel Optane PMEM and its volatile or non-volatile
capacity will be inaccessible because that configuration mode is not
supported on current platform.
FQXSFMA0052I
DIMM [arg1] has been disabled due to the error on DIMM [arg2].[arg3]
FQXSFMA0065I
Multi-bit CE of DIMM [arg1] has been deasserted after performing
post package repair. DIMM identifier is [arg2].
FQXSFPU0020I
The UEFI firmware image capsule signature is invalid.
FQXSFPU0021I
The TPM physical presence state has been cleared.
FQXSFPU0023I
Secure Boot Image Verification Failure has been cleared as no failure
in this round boot.
FQXSFPU0025I
The default system settings have been restored.
FQXSFPU4034I
TPM Firmware recovery is finished, rebooting system to take effect.
FQXSFPU4038I
TPM Firmware recovery successful.
FQXSFPU4041I
TPM Firmware update is in progress. Please DO NOT power off or
reset system.
FQXSFPU4042I
TPM Firmware update is finished, rebooting system to take effect.
136
ThinkSystem SR860 V2 Messages and Codes Reference
Severity
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Advertisement
Table of Contents
