First, pull the brew unit sideways
and then slide it out forwards .
While doing this, tilt the brew unit
forwards .
If you cannot remove the brew unit or
can only do so with difficulty, the brew
unit is not in the correct position (see
"Problem solving guide").
Cleaning the brew unit
The moving parts of the brew unit
are lubricated. Cleaning agents will
damage the brew unit.
Only ever clean the brew unit by
hand with warm water. Do not use
any cleaning agents.
Clean the brew unit by hand under
warm running water without using
any cleaning agents.
Cleaning and care
Wipe any coffee residue from the
filters. One filter is located in the
funnel. The other filter can be found
to the left of the funnel.
Dry the funnel to prevent ground
coffee sticking to it the next time a
coffee is made.
Cleaning the inside of the appliance
Use your vacuum cleaner or similar to
remove dry coffee grounds.
Clean the brew unit niche with a
damp, clean sponge cloth. When
cleaning, pay particular attention to
the areas marked in white in the
illustration, e.g. around the drive
shaft.
77