Miele CVA 7845 Operating And Installation Instructions page 74

Cleaning and care
Inserting the milk valve
Do not switch on the coffee machine
while the milk valve is removed.
 Insert the stainless steel bolt from
above.
 Insert the silicone seal into the milk
valve holder.
 Insert the holder and silicone seal
until they audibly click into place.
 Connect together the angular
moulded hose and longer milk
pipework. Start by attaching the
moulded hose to the top of the
central spout. The black connecting
piece should be pointing to the rear.
74
 Then, connect the bottom end of the
moulded hose to the dispensing unit.
 Insert the milk pipework into the milk
valve on the left and right-hand sides.
Push the connecting pieces into the
silicone seal as far as they will go.
 Check that the milk pipework is snug
against the housing and that the
cover can be easily attached.
Tip: If necessary, turn the milk
pipework towards the back at the
connecting piece on the right-hand
side.