In Expert mode, you can allocate a
bean type temporarily and change the
portion size while the drink is being
made. The setting will not be saved and
will only apply for the current drink.
Switching Expert mode on and
off
Expert mode is located in the pull-down
menu at the top edge of the screen.
Touch the top edge of the screen in
the middle and drag down with your
finger to open the
The schematic representation of the
bean containers is displayed.
Touch
Expert mode
Expert mode is active when
mode
is highlighted in orange.
To exit the pull-down menu, drag the
menu window back up to the top or
touch an area of the screen outside of
the pull-down menu.
Expert mode: assigning bean
containers
Touch the top edge of the screen and
open the
Expert mode
menu.
Now select the bean container
containing the beans you want to use
for the current drink.
To close the menu window, drag it
back up to the top.
If necessary, switch to the drinks
menu.
Now start making the drink.
Expert mode
.
.
Expert
pull-down
Expert mode: changing the
portion size
The drinks menu is displayed.
If you select DoubleShot or
2 portions , Expert mode cannot be
used to change the portion size.
Select a drink.
The preparation process will start. You
can adjust the portion size while it is
being dispensed, e.g. individually
change the amount of hot milk, milk
froth and espresso for a latte
macchiato.
Dispensing
Touch the bar and adjust the
controller (small triangle) as required.
Expert mode
43