Building In The Coffee Machine - Miele CVA 7845 Operating And Installation Instructions

Installation

Building in the coffee machine


Danger of injury due to incorrect
operation.
An appliance that has not been built
in is not safe and can cause injuries.
Only ever use the coffee machine
once it has been built-in.

Danger of damage due to
incorrect operation.
If the ambient temperature range is
not observed, the coffee machine
may not function properly.
Only ever operate the coffee
machine when the ambient
temperature is within the range of
+16 °C to +38 °C.
Maintain a minimum installation
height of 850 mm.
Tip: If a gap of at least 299 mm is
maintained between the wall and the
coffee machine, you will be able to
open the appliance door wider, making
the machine easier to use. For instance,
it will be easier to remove the left-hand
bean container.
112
To install the machine, you will need a
TX 20 screwdriver.
Tip: It is useful to have somewhere at
the height of the niche to place the
coffee machine on. This will make it
easier to connect the appliance to the
electricity and water supply.
Connecting the fresh water and
electricity supplies
Observe the information under
"Mains water connection" and
"Electrical connection".
 Connect the coffee machine to the
fresh water and electricity supplies.
Removing the transport safety device
There is a red silicone plug inside the
screw hole, which secures the
appliance door during transport to
prevent transport damage.
Remove the silicone plug before
screwing the coffee machine to the
cabinet.