Miele CVA 7845 Operating And Installation Instructions page 113

 Pull firmly on the red silicone plug to
remove it from the screw hole.
The silicone plug is not required again.
Dispose of it with your household
waste.
Pushing in and aligning the coffee
machine
When pushing the appliance into the
niche, make sure that the electrical
and mains water connections do not
get trapped or damaged.
 Push the coffee machine all the way
into the niche until you feel some
resistance.
 Check the height of the coffee
machine to make sure that it is sitting
centrally in the niche and that it is
level. Align the appliance.
Never align the coffee machine by
adjusting the door hinges. This will
prevent the milk container from
attaching correctly and interfere with
the milk preparation process.
You can now screw the coffee machine
to the cabinet.
Screwing the coffee machine to the
cabinet
 Open the appliance door.
2 TX20 (25 mm) screws are supplied
with the appliance.
 Secure the coffee machine to the side
walls of the cabinet using the screws
supplied. Tighten both screws by
hand.
Tip: To make it easier to attach the
screw on the left, you can remove the
door opening limiters and increase the
door opening angle to approx. 170°
(see "Door opening limiters"). Make
sure that there is sufficient space
available and that the appliance door is
not going to hit an adjacent wall.
 Check that the coffee machine is
working correctly.
Installation
113