Pc Interface (Not Gigaset C47H); Writing And Editing A Text Message - Gigaset SL56 User Manual

Appendix
Insofar as no Guarantee default exists, Gigaset Communications reserves the right to
◆
charge the customer for replacement or repair.
The above provisions does not imply a change in the burden of proof to the detriment
◆
of the customer.
To invoke this Guarantee, please contact the Gigaset Communications helpdesk on
1850 777 277. This number is also to be found in the accompanying user guide.

PC Interface (not Gigaset C47H)

Depending on your handset, you can connect the handset to your computer via Blue-
tooth or a data cable. Your computer can then communicate with your handset using
the "Gigaset QuickSync" program (free download from www.gigaset.com). You can
access your handset's directory, and, depending on your handset, you can download
sounds and CLIP pictures from your computer onto the handset (please refer to the user
guide belonging to your handset).
During the transfer of data between handset and PC, you will see
During this time, it is not possible to use the keypad and incoming calls will be ignored.

Writing and editing a text message

The following rules apply when writing a text message:
Control the cursor with qr.
◆
Characters are added to the left of the cursor.
◆
Press the star key * to display the table of special characters. Select the required
◆
character and press the display key
tion.
The first letter of the name of directory entries is automatically capitalised, followed
◆
by lower case letters.
Writing text messages/names (without predictive text)
Press the relevant key several times to enter letters/characters.
When you press a key and hold it, the characters from that key appear in the bottom dis-
play line and are highlighted one after the other. When you release the key the high-
lighted character is inserted into the input field.
Setting upper/lower case or digits
Press the hash key # briefly to switch from "Abc" mode to "123" and from "123" to
"abc" and from "abc" to "Abc" (upper case: 1st letter upper case, all others lower case).
Press the hash key # before entering the letter.
You can see in the display whether upper case, lower case or digits are selected.
108
to insert the character at the cursor posi-
§Insert§
ß
on the display.