Activating/Deactivating Cw (Call Waiting); Setting An External/Internal Enquiry Call - Gigaset SL56 User Manual

Activating/deactivating CW (call waiting)

This function can be set up separately for each subscriber. When call waiting is activated
the caller will hear the ringing tone if you are already making a call. This call is
announced both acoustically, and visually on your handset screen.
If call waiting is deactivated, the caller will hear the ringing tone if you are already mak-
ing a call and other devices are assigned to the same MSN.
When call waiting is deactivated, the caller will hear the busy tone if you are already
making a call and you are the only subscriber assigned to this MSN.
Handling an external waiting call see page 32.
¢ ¢
v w Ð
/
s
INT11: Int.11
v
s
Call waiting

Setting an external/internal enquiry call

Your ISDN connection provides 2 telephone lines that can be used simultaneously
(B channels).
You can set up your telephone so that:
when an enquiry call is made during an external call to another external subscriber,
◆
the call is placed on "hold" at the telephone exchange so that your second ISDN line
remains free.
when an enquiry call is made during an external call to another external subscriber,
◆
the call is placed on "hold" in your base station and both ISDN lines are used.
By default, Ext. enq. call is activated.
If Ext. enq. call is set and it is not possible to place a call on hold in the
i
telephone exchange, the call is automatically placed on hold internally in
the device itself.
Initiating a enquiry call see page 28 or page 29.
¢ ¢
v w Ð
/
either ...
s
Int. enq. call
or ...
s
Ext. enq. call
¢ ¢
Base Settings
Select the internal number, e. g. INT 11: Int.11.
Open the submenu.
Select and confirm (‰ = activated).
OK
¢ ¢
Base Settings
Set Int. enq. call:
Select and confirm (‰ = activated).
OK
Set Ext. enq. call:
Select and confirm (‰ = activated).
OK
¢
Setup user Setup device
ISDN settings
System settings
79