Gigaset SL56 User Manual page 18

Entering your phone numbers (MSNs) manually and entering names for MSNs
The display shows: Enter own numbers (MSN)?
[RRRRRRRRRRRRRRRRRRRRRRRRRR]
YES
[RRRRRRRRRRRRRRRRRRRRRRRRRR]
YES
~
s ~
Í
s
Save entry
The MSNs entered will automatically be assigned to all registered handsets as receive
MSNs. MSN1 will automatically be assigned to all registered handsets as the send MSN.
This procedure is then repeated for MSN2 to MSN9 and for MSN0.
To set the device type:
On base station:
If your base station has the option of connecting an analogue terminal, you must set the
device type (see user guide for base station).
The display shows: Set device type?
If you have connected an analogue device to your base station, select
The display shows: Set device type for internal 21?, select
Select the appropriate device type and confirm with
tings, refer to the user guide for the base station.
¯
Briefly press the
Setting up the base station – Getting started wizard
Press the display key to confirm the prompt.
Press the display key to confirm the prompt.
Enter name.
Entering a name for an MSN is optional.
If necessary, scroll to the line <Number> and enter
the MSN. If the MSBNs were found automatically,
the numbers will already be entered.
Press the display key to open the submenu.
Select the menu item and confirm.
OK
SX205isdn SX255isdn
display key to continue.
SX303isdn SX353isdn
.
YES
(‰ = on). For the possible set-
OK
.
YES
17