Conference Call - Gigaset SL56 User Manual

Functions during a call
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
BACK
either ...
q y x
or
or ...
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
CONF.
or ...
Toggle
Requirement: You have established an enquiry call (page 28 or page 29).
There is both an active call (the one established with an enquiry call) and a held call (the
first). You can speak to both subscribers one at a time.
Using q or y
An external subscriber will hear the set waiting melody in a connection on hold
(page 80) if the connection is on hold internally (page 79). An internal subscriber in a
connection on hold does not hear a waiting melody.
To end an enquiry call/toggling:
either ...
v
s
End
or ...
a

Conference call

Requirement: You have established an enquiry call (page 28 or page 29).
There is both an active call (the one established with an enquiry call) and a held call (the
first). In a conference call you can speak to both of the other parties at the same time.
You can establish a conference call with
i
◆
◆
It is possible to conduct two conference calls at the same time on one base station.
30
The internal subscriber dialled is busy:
Press the display key to return to the external sub-
scriber.
The internal subscriber has answered:
Toggle (page 30):
Switch between subscribers.
Conference call (page 30):
Press the display key to establish a conference call.
Transfer the call (page 31).
x, you can switch between the two subscribers.
To end the call that is currently active:
Open menu.
Select and confirm. You return to the waiting sub-
OK
scriber.
Press the end call key.
The active connection is ended. You will automati-
cally be called back by the person on hold.
two external subscribers or
one internal subscriber and one external subscriber.