DeLonghi PrimaDonna Elite ECAM656.75.MS Manual page 23

DISPLAYED MESSAGE
INSERT MILK CONTAINER
INSERT INFUSER ASSEMBLY
PUSH
INSERT "MIX CARAFE"
WATER CIRCUIT EMPTY
PRESS OK TO START FILLING
PROCESS
PRESS OK TO START CLEANING
PROCESS OR TURN MILK
FROTH ADJUSTMENT DIAL
POSSIBLE CAUSE
The milk container (D) is not inserted
correctly.
The infuser (A19) has not been replaced
after cleaning.
The carafe (E) is not correctly in place
The water circuit is empty
The milk container has been inserted
with the froth adjustment dial (D1) in the
"CLEAN" position.
REMEDY
Insert the milk container as far as it will go (fig. 19).
Insert the infuser as described in section "16.9 Clean-
ing the infuser".
Insert the carafe and push as far as it will go
Press "
(C6) until it flows out normally. Delivery stops
automatically.
If the problem persists, make sure the water tank
(A16) is fully inserted.
To proceed with the CLEAN function, press "
or turn the froth adjustment dial to one of the milk
positions.
28
" to deliver water from the spout
"