Timer Setting - Fujitsu AIRSTAGE UTY-DCGYZ2 Operation Manual

3-4-8-2. Server Setting


3
3-4-9. Timer Setting
Set the timer which stops the operation automatically to prevent you from forgetting to turn off.
(3)
(1)

3

6
En-42
4
5
6
(2)
4 5
(1) Set the item and tap the [OK] button.
No. Item
"Sender Email

Address"
"Outgoing Email

Server Address"
"Port"
3
"Account Name"
4
"Password"
5
"SSL"
6
* If the server setting is not correct, mail is not sent. For details,
refer to your mail service.
(1) Tap the MENU button.
(2) Tap the [Installer Setting].
(3) Tap the [Timer Setting].
(4) Set the item and tap the [OK] button.
No. Item
"Auto Off Timer"

"Operation Stop

Time"
"Time Range"
3
"Start Time"
4
"End Time"
5
"Registered
6
groups"
Description
Inputs sender mail address.
Inputs outgoing mail server (SMTP).
Inputs port No. of SMTP.
Inputs account name (in most
cases, mail address or the part of
mail address before @) for SMTP
authentication. (Max. 50 characters)
Inputs the password for SMTP
authentication. (Max. 12 characters)
Selects the encryption type according
to mail service.
"None": Does not encrypt.
"SMTP over SSL": Encrypts all from
the beginning and performs SMTP
communication.
"STARTTLS": Starts SMTP
communication by clear text at first
and encrypts the required part of text
from the middle of communication.
Description
Sets "Enable" or "Disable" of the timer.
When "Enable" is selected,  to 5
are enabled.
Sets "Operation Stop Time" in
10-minutes unit. [30-240 min]
Selects "Time Range".
"Range Spec." / "Continuous"
Sets "Start time". When "Range Spec."
is selected, this item is enabled.
Sets "End time". When "Range Spec."
is selected, this item is enabled.
Sets the groups to be controlled.
→Refer to 2-3-1-1.