Table of Contents
Advertisement
Additional Information
Troubleshooting
If you have any questions or problems not covered below, please consult your
nearest Sony service facility.
Symptom
The ON/STANDBY switch
does not function.
The power is turned on but the
VCR does not operate.
The clock has stopped and
"–:– –" lights in the display
window.
The playback picture does not
appear on the TV screen.
The picture is not clear.
Symptoms caused by contaminated video heads
• Normal picture
Remedy
• Connect the mains lead to mains securely.
• Moisture condensation occurs. Turn the power off,
unplug the mains lead and leave the VCR to dry for
over one hour.
• The clock stops if the VCR is disconnected from the
mains for more than an hour. Reset the clock (and
timer).
• Make sure the TV is set to the video channel. If you are
using a monitor, set it to video input.
• Adjust the tracking with the TRACKING +/– buttons.
• Make sure the colour system is correctly set to the
system that the tape was recorded in.
• The video heads are dirty (see below). Clean the video
heads using the Sony T-25CLD, E-25CLDR, or T-
25CLW video head cleaning cassette. If these cleaning
cassettes are not available in your area, have the heads
cleaned at your nearest Sony service facility (a
standard service fee will be charged). Do not use a
commercially available liquid-type cleaning cassette
other than Sony's, as it may damage the video heads.
• The video heads may have to be replaced. Consult
your local Sony service facility for more information.
• Rough picture
initial
• Unclear picture
• No picture (or
black & white
screen appears)
terminal
continued
Additional Information
GB
65
Advertisement
Table of Contents
