Sony SLV-K877TK Operating Instructions Manual page 38

Setting the timer manually (continued)
2
• CURSOR
3
• CURSOR
4
• EXECUTE
5
•
To stop recording
To stop the VCR while recording, press p STOP.
Daily/weekly recording
In step 2 above, press CURSOR . to select the recording pattern. Each time
you press CURSOR ., the indication changes as shown below. Press
CURSOR > to change the indication in reverse order.
GB
38
Basic Operations
Set the date, start and stop times,
programme position, and tape speed:
1 Press CURSOR / to select each item in
turn.
2 Press CURSOR >/. to set each item.
To correct a setting, press CURSOR ? to
return to that setting and reset.
To record the same programme every day or the same day every
week, press CURSOR . while the date is flashing. For details, see
"Daily/weekly recording" below.
To record from a source connected to the LINE-1 IN or the LINE 2
IN jacks, press INPUT SELECT to display "L1" or "L2" in the
"PROG" position.
Press CURSOR / to confirm the setting.
To enter another setting, move the cursor to the next line and repeat
step 2.
Press EXECUTE.
Press u to turn off the VCR.
The TIMER indicator appears in the display window and the VCR
stands by for recording.
To record from other equipment, leave the connected equipment
switched on.
the current date n SUN-SAT n MON-SAT n MON-FRI n EVERY SAT .....
n EVERY MON n EVERY SUN n 1 month later n (dates count down)
n the current date
TIMER SET / CHECK 2 5 . 1 0 SAT
DATE START STOP PROG
1 . 9 11 WED – : – – – : – – – – SP
– . – – – : – – – : – – – – –
– . – – – : – – – : – – – – –
– . – – – : – – – : – – – – –
– . – – – : – – – : – – – – –
– . – – – : – – – : – – – – –
– . – – – : – – – : – – – – –
– . – – – : – – – : – – – – –