Sony SLV-K877TK Operating Instructions Manual page 39

To use the VCR after setting the timer
To use the VCR before a timer recording begins, just press u. The TIMER
indicator turns off and the VCR switches on. Remember to press u to reset
the VCR after using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter.
• Display tape information on the TV screen.
• Check the timer settings.
• Watch another TV programme.
Tips
• To set the programme position, you can also use the PROG +/– or programme
number buttons.
• To set the tape speed, you can also use the TAPE SPEED button.
• To record NTSC signals, set the tape speed to SP or EP. To set the EP mode, display
"LP" in the tape speed position.
Note
• "TIMER" flashes in the display window when you press u with no tape inserted.
39
Basic Operations
GB