Table of Contents
Advertisement
To listen to the dubbed sound (normal audio)
Press AUDIO MONITOR until the "L," "R," and "STEREO" indicators go off
in the display window.
Audio dubbing from the microphone
Using the microphone, you can add songs or narration on a recorded
tape. Sound from the microphone is mixed with the original hi-fi sound
and recorded on the normal audio track.
Before you start dubbing
• Connect the microphone(s) to the MIC IN 1 and/or 2 jack(s), and turn
on the microphone(s).
KARAOKE ON/OFF
1
Set KARAOKE ON/OFF to ON.
2
Insert the prerecorded tape into the VCR. Search for the end of the
section to be replaced and press P PAUSE.
Make sure that the tape has its safety tab in place.
3
Press COUNTER RESET to reset the counter to "0H00M00S."
4
Rewind the prerecorded tape to the beginning of the section to be
replaced.
The VCR pauses.
5
Press AUDIO DUB.
The audio dubbing indicator
6
To start editing, press P PAUSE to start dubbing and sing or speak into
the microphone.
When the counter reaches "0H00M00S," audio dubbing stops
automatically.
P PAUSE
MIC IN 1/2
Microphone
1
2
3
4
5
6
7
8
9
0
appears in the display window.
COUNTER
RESET
AUDIO DUB
continued
GB
63
Editing
Advertisement
Table of Contents
