Çalışma denemesi:
Kontaklar, komple içeri bastırılabilmeli ve kendi kendilerine
başlangıç konuma geri dönmelidir. Aksi taktirde, cihaz arka tarafını
gevşetin ve son konum yaylarının doğru oturup oturmadığını kontrol
edin.
Şalter ayaklarının yerleştirilmesi
3ZW1012-0WL11-0HA1
Function test:
It must be possible to press the contacts completely together, and
they must return independently to their original position. If this is not
the case, loosen the rear wall and check that the end position
retaining springs are properly in place.
Attaching the circuit breaker feet
9
7
8
Boyut / Size
4
10 Nm
24 – 22