Scanner Driver Settings - Sharp AL-1530CS Online Manual

3
Scanning an Image from a TWAIN-Compliant Application (part 3)

Scanner Driver Settings

The scanner driver setup screen consists of the "Set-up screen", which lets you select scan settings, and the "Preview
screen", which shows the scanned image. For details on the scan settings, click the "Help" button to display Help.
Set-up screen
"Scanning Position" menu
Select the desired scanning position from
"Platen" (original table) or "SPF".
Select "SPF" when you placed the
original in the SPF/RSPF. On the
Note
AL-1530CS, this setting is fixed to
"Platen".
"Scan" button
Click to scan an original or image according
to your preferences. Before clicking the
"Scan" button, check if your preferences are
set correctly.
To cancel your scanning job after
clicking the "Scan" button, press the
[Esc] key on your keyboard or the
Note
clear ( ) key on the unit.
"Scanning Mode" menu
Switch the scanning mode between the
"Preset" and "Custom Settings" screen.
For details on each of these settings, click
the "Help" button to display Help.
"Preview" button
Previews the document.
If "Preview" is canceled by
immediately pressing the [Esc] key
Note
on your keyboard or the clear (
key on the unit, there may be no
images displayed on the preview
screen.
"Help" button
Click to display the help file for the scanner
driver.
CONTENTS
INDEX
)
14