Printing Overview; Contents - Sharp AL-1530CS Online Manual

2

Printing Overview

The flow chart shown below provides printing overview.
Reference: For more information on printing, see
! When the paper source is the paper tray or multi-bypass tray, verify that the paper has been loaded before starting
printing.
! Ensure printing has been completed before turning the power off. Do not remove the power cord before turning
Caution
the unit off.
When printing from paper tray or multi-bypass tray*
* The multi-bypass tray can be used on the AL-1551CS, and the single bypass can be used on
the AL-1530CS/1540CS. For the procedures for loading paper in each type of tray, see
"LOADING PAPER" in the Operation Manual.
Basic Printing.
Prepare the document you intend to print
Open the printer driver setup screen and set the print preferences
Reference:
Printer Driver Settings, Printing a Watermark,
Printing Multiple Pages on One Page,
Send print data from your computer
Printing
Exit printing
When printing from single bypass*
Fitting the Printed Image to the
Two-sided Printing (AL-1551CS only)
Load a single sheet of paper into the single bypass
Reference:
For more detail, refer to the "BYPASS FEED (including special paper)" in
the Operation Manual.
Paper,

CONTENTS

INDEX
2